This 30-Second Recipe Will Make Your Bathroom Sparkling Clean

When it comes to cleaning your bathroom, people have a hard time deciding when to begin because it takes a lot of effort and time. Bathroom cleaning products are also somewhat costly, making people search for the cheapest product. But, what if you could make your bathroom spotlessly clean with minimal effort and on a small budget? There are some simple bathroom cleaning recipes to clean your bathroom in the most effortless and cost-saving way possible. These recipes only require you to purchase common ingredients like hydrogen peroxide, ammonia, etc., to create your own bathroom cleaner. 

Here’s how it works:

Grease and oil stains can be dissolved with ammonia

Household ammonia can break down the cell proteins present in grease and oil, making it a strong cleaner. Usually, household ammonia is an active ingredient in many floors, windows, and tub cleaners. However, it can be poisonous and extremely dangerous if it comes into contact with your skin, eyes or if you end up inhaling it. It may be a highly potent cleaning agent, but you should never combine it with other chemicals as it can turn out to be very harmful. Nevertheless, it is safer and cheaper than store-bought household chemicals.

Hydrogen peroxide is a useful anti-microbial tool

Hydrogen peroxide can be used as an effective cleaning product for your bathrooms. At the same time, this chemical is known for treating cuts and wounds. It destroys mildew and bacteria and gets rid of bad odor with its anti-microbial and anti-fungal qualities. You can use it for removing lime-scale and yellow marks from your bathroom sink, bathtub, and toilet, besides using it for whitening your home textiles and bed linens and cleaning carpets and cookware with it.

The benefits of creating your own bathroom cleaning recipe

Household chemicals are expensive and can be finished in no time if you have a big house. Instead of using such products, it would be better to create your own cleaning product. This will cost you much less than buying one from the store or supermarket. Moreover, if you prepare it in the right proportions, it becomes less harmful and poisonous.

How to create your own bathroom cleaning products?

The ingredients required: 100 ml ammonia, and 100 ml hydrogen peroxide

Preparation method:

• Use a plastic bottle with an atomizer or a glass jar. Rinse it under running water and wipe it dry with a towel or paper napkins.
• Before pouring the ammonia into the bottle, make sure you wear rubber gloves, a mask, and safety glasses for protection.
• Add the hydrogen peroxide in a thin stream to the ammonia.
• Gently and carefully shake the bottle to mix it properly. 
• You can either spray this mixture onto the rust or apply it onto a dry and clean cloth and put it on the rust. Whichever way you do, let it remain in this state for at least 10-15 minutes.
• Use running water to wash it all off thoroughly.

A mask and proper ventilation is necessary

When you use ammonia for creating your own bathroom cleaning recipe, be sure to open all the windows since ammonia can be poisonous. Don’t forget to put on your rubber gloves while using them to clean your sink, bathtub, or toilet. Make sure you don’t allow your other family members, children, and pets to enter the bathroom until you are done cleaning and washing the mixture off thoroughly and ventilating it.

Here’s another recipe to create a DIY all-purpose bathroom cleaner

Ingredients:

• 1 tbsp of Castile soap
• 1 tbsp of baking soda
• 20 drops of orange oil
• 30 drops of tea tree oil
• 2 cups of warm water
• Spray bottle

Preparation method:

Pour warm water into the spray bottle and add the baking soda into it as well. Shake the bottle to mix it well, and then add the essential oils along with the Castile soap and gently shake it again. You can use this to clean everything from the bathtub to the toilet. It even makes a brilliant homemade soap-scum remover. 

Spray this solution on the bathtub, floor, walls, sink, toilet (both interior and exterior), and shower. Allow the solution to remain for a while, and then wipe it clean with a damp cloth.

Alternative bathroom cleaning recipes for homemade bathroom cleaners

1. Mold removal cleaning solution recipe

In a glass spray bottle, combine hydrogen peroxide and water. Spray this solution on the mold-infested areas of your bathroom and let it soak for a while. If the mold is still visible even after 30 minutes, spray some hydrogen peroxide straight on the mold. Let it sit for another 10 minutes, and then use a nylon scrub pad to scrub it off. Rinse off the solution after scrubbing or wipe it clean with a damp sponge.

2. Mildew removal cleaner recipe

You can simply pour hydrogen peroxide over it to remove it for mildew. Leave it on for 30 minutes, and then wipe it off with a damp sponge to make your bathroom clean and spotless and prevent any infection.

3. Soap-scum removing cleaner recipe

Combine baking soda and hydrogen peroxide in a glass bowl and stir it until it forms a thick paste. Use a damp sponge to apply the paste to the bathroom tiles. Leave it on the tiles for around 30 minutes, and then scrub the paste with an old toothbrush to remove the soap scum. Once you are done scrubbing, rinse it off with warm water.

These simple bathroom cleaning recipes can be the best low-cost alternative to commercial cleaners. The ingredients used to make them are fairly inexpensive, and the biggest advantage is in quantity. You gain much more from making them yourself. These are far safer than commercial bathroom cleaners since you can control what chemicals you add to the mix.

Read Next: 10 Ways How To Conserve Energy To Reduce Your Electricity And Gas Bill